Basement Leaks

 

4  Brothers Roofers  in water proofing your basement without digging. We use a revolutionary bonding polymer that water proofs your basement without the expense or mess of digging up your yard, this allow the service to be done quickly, cost effectively and the hassle of crews being in your yard tearing up your landscape for days. This is the hottest new product ever to come out to eliminate those costly and timely issues.

When repairing foundation cracks it is important to realize you are not just stopping an annoying puddle on the basement floor, but you are taking a step to improve your home ecosystem (the relationship between a community of living organisms in a particular area and its nonliving environment).

img

Cracks that leak water allow moisture into our homes which leads to mold growth. Mold poses health risks like respiratory complications and asthma symptoms. Even if the crack is not visibly leaking water, it can still be leaking dangerous soil gases like Radon directly into your home. According to the EPA, Radon is the number one cause of lung cancer in non smokers and a serious health risk to a home’s ecosystem. By using the 4 Brothers Home Improvment Crack Repair System you not only stop a leaky crack, but also benefit the health of your home and the occupants.

4 Brothers Home Improvment Repair Systems is the most effective foundation crack repair method on the market that requires NO DIGGING. Ever.

A basement wall crack in a poured basement foundation is generally caused by concrete shrinkage. This shrinkage can continue for three years after the basement wall has been initially poured and sometimes can occur even longer afterward. Even after this period, continued pressures, such as soil contraction and expansion, can cause further foundation cracks and separation. So a long-term solution is needed — one that is flexible enough to permanently fix the crack even with continued wall movement. Don’t wait as these issues just get worse over time and protect your family from potential noxious fumes and water damage.

 

Low-Pressure Crack Injection Process

Concrete repair is a four billion dollar a year business according to Concrete Repair Digest magazine. Concrete crack repair is one element of this market.

This article limits itself to the repair of poured foundation cracks in general and specifically to cracks of structures 16 inches in thickness or less. Most typically, we are relating to poured foundations in basements and crawl spaces, commercial buildings, parking decks, swimming pools, and unique poured-wall structures such as sea walls.

These applications have in common the preferred method of repair – low pressure crack injection of a liquid polymer which hardens with time. Other applications, such as those involving very thick-walled structures (such as dams) and very long cracks (found on bridges and highways) may be more suited to high pressure injection.

By far the most frequent type of crack in a foundation is caused during construction by failure to provide sufficient working joints to accommodate drying shrinkage and thermal movement. Also common are those cracks caused by structural settlement, overload or earthquakes. Most cracks are formed in the first 30 days of the pouring of the concrete structure.

These cracks may initially be too small to be detected and to have any negative consequences at first, while at other times, never growing to be a problem at all. Other cracks become visible very early and cause problems, such as water leakage, almost immediately.

Even the early undetected cracks can, in time, become larger and cause problems, whether structural or more commonly a source of water leakage.

How this happens can be delineated as:


  • Especially in colder climates, moisture can permeate these tiny breaks in the concrete substrate and enlarge them to full-fledged leaking cracks by moisture expansion/contraction resulting from freeze/thaw cycle of the moisture.

  • In addition, as the ground around the foundation stabilizes, any movement can cause the rigid concrete substrate to separate at these tiny breaks in the concrete, enlarging then to a water- leaking size.

  • A more serious problem to solve is when the area around the foundation remains unsettled, resulting in an ongoing stress on the concrete structure. If this stress exceeds the strength of the concrete, cracks will form even where initial cracks did not exist (even after repair of these initial cracks).

The first two listed sources of crack formation and propagation are situations to which repair can readily be effective and complete. The third situation should not be addressed unless done jointly with soil stabilization, peering, or mud-jacking to eliminate the cause of continuing settling.

Even the first two situations require proper applications and procedure to effectively solve the problem. The materials proven to be most effective in concrete crack repair are:

  • Two-component epoxies, which effectively seal a crack and at the same time reinforce the repair area to be actually stronger than the unrepaired concrete area around it. Epoxies are always the preferred material when the structural integrity of the concrete is open to question.

  • Polyurethane elastomeric foams, when concrete structural integrity is not a problem and problem is only water leakage. Polyurethane foams harden very rapidly (unlike most epoxies) and are less likely to flow out the back of some cracks as epoxies may. Furthermore, polyurethane foams expand in the crack area and may reach areas that an epoxy may not if not properly injected.

Polyurethane, being elastomeric, may also handle concrete movement more effectively than the more rigid epoxies (although this is a debated point and not one that this report draws conclusions on).

The secret to effective crack injection, whether epoxies or polyurethanes, is patient, low-pressure introduction of the liquid into the cracks, low pressure (20-40 PSI) allows the applicator to properly monitor the injection process. At this pressure range, the applicator can be confident that the crack has been saturated with the liquid polymer up to that point when liquid begins to collect at an adjacent surface port. If done at higher pressure, the liquid polymer may only be filling the larger sections of the crack, leaving smaller crack sections available for future deterioration.

Traditionally, crack injection required expensive, cumbersome proportioning equipment. These remain useful where high pressure and/or very large volumes of liquid polymer need to be injected.

The development of dual cartridge dispensing, utilizing either disposable or re-usable dual cartridges or containers, has significantly simplified the equipment and power requirements. It is now possible to utilize manual dispensing tools similar to caulk guns to inject both epoxies and polyurethane systems. It is important to note that it is best to choose such equipment which utilize a spring to control injection pressure. Other manual tools, without the spring as a control, can easily cause injecting at pressure much higher than desired. This may result in the incomplete injection of a crack, the most common reason for crack repair failure. Air-powered equipment is also available to do crack injection via dual cartridge dispensing. It is important that this equipment have means of controlling injection pressure to 20-40 PSI. Air powered equipment make it feasible to use larger containers, which may reduce the overall cost of the liquid polymer system.

Low pressure injection crack repair begins with the surface sealing of the crack and the placement of the surface ports along the crack opening. The best material for this is epoxy pastes. Epoxies bond very effectively on to clean, dry roughened concrete surfaces. This is accomplished by scraping the crack area with a wire brush. This is followed by the placement of the surface ports as far apart as the wall is thick.

There are several epoxy pastes (such as Emecole 901) which harden in less than three hours in a thin film such as done in surface sealing (1/8 inch or less on the average). Only a mercaptan based epoxy (such as Emecole 301) however, can harden in less than 30 minutes and be ready for injection. This is true even in cold weather. While this type of epoxy is preferred when expediency is important (such as in individual cracks less than 20 feet in length), these products require ventilation because of an undesirable odor before mixing.

Epoxies for crack injection vary in viscosities (such as the Emecole 101 series and Emecole 121 series) to accommodate the width of the crack. Some applicators prefer to use a low viscosity system (300-500 CPS) for all sized cracks, while others prefer to use increasing viscosity systems as the width of the cracks increase (up to 3000 cps). Some applicators will use epoxies in gel form for cracks exceeding ΒΌ inches. It is this article’s opinion that the key is to use any viscosity which requires less than 40 PSI to inject a given crack. If there is concern about the material leaking out the back of the crack, polyurethane foam should be used (such as Emecole 102, Emecole 103 or Emecole 104).

Most epoxies require hours to harden. This is advantageous to assure time for the epoxy to flow and fill even the smallest openings of a crack. At the same time, this characteristic can have disadvantages.

For one, it is possible for the epoxy to flow out of the crack before it has hardened if the area behind the concrete has separated from the foundation. This is why it is important to re-inject the crack after the initial filling. If a substantial amount of epoxy is again injected, there is cause for concern.

Secondly, if it is necessary to remove the surface seal and ports (i.e. for aesthetic reasons) this must be done 1-3 days after injection with most systems. (the exception being products such as Emecole 302 which harden within one hour but are more expensive).

To overcome these disadvantages of epoxies, polyurethanes elastomeric foams become effective alternatives for those applications involving only crack sealing (waterproofing) and not structural repair. Along with their nature to be elastomeric and being able to move with slight concrete movement to keep a seal, Polyurethanes begin to harden and foam within minutes of injecting. Some (such as Emecole 104) begin to foam virtually upon entering the crack and are ideal to stopping flowing water and to filling a large void (although this same characteristic keeps it from filling very small openings of a crack).

The rapid thickening and hardening of polyurethane foams permits the removal of the surface seal and ports within 1-2 hours of injection. It also reduces the chances of it flowing out of an injected crack while still in liquid form and, even if it is leaking out slowly, it still has the ability to foam to fill out the crack.

For those typical crack injection repairs of a non-structural nature, it is this report’s opinion that polyurethane foams (especially products like Emecole 102) work equally as effectively as epoxies as long as the foaming is kept to a minimum (2-3 times its liquid volume). At this level the strength and elastomeric nature of the polyurethane is optimized, and the foaming process is best utilized (improves the bond by adding a mechanical nature to the chemical bond plus the foaming leads to faster hardening).

The secret to effective low-pressure crack injection is gradual introduction of the liquid polymer into the crack at low pressures (20 to 40 psi). This method requires some patience, but it allows the applicator to monitor the injection process and ensure that the crack is completely filled. Incomplete injection of a crack is the most common reason for crack repair failure.

To fill a typical concrete crack in a residential foundation wall, injecting at pressures above 40 PSI may not be effective. Liquids prefer to take the path of least resistance. At higher pressures, the liquid has enough force to rise up the crack without filling the backside of the crack which is often narrower than the front of the crack. The applicator can only determine how the crack is being filled by watching the progress of the liquid traveling from port to port.

At pressures less than 40 psi, the liquid epoxy or urethane can only get to the port above it by first filling to the back of the crack and then rise as it fills the concrete wall crack. As a consequence, when the applicators see material coming out of the respective port above or adjacent to the port being filled, he (or she) knows that the basement wall crack is filled with product up to that point. At pressures greater than 40 PSI, the liquid can overcome gravity and reach the port adjacent to the one being filled without filling small sections of the wall crack.

The use of low-pressure injection with epoxy and polyurethane foam is a proven solution to the problems associated with many if not most foundation crack repair situations.


Carbon Fiber Stabilization Products

Emecole and Fortress Stabilization Systems have partnered to introduce Carbon Fiber / Kevlar technology in the form of Carbon Fiber / Kevlar Grid Straps, the next step in permanent foundation stabilization. The hybrid grid strap system is comprised of high tensile strength carbon fibers woven together by Kevlar strands.

Carbon Fiber / Kevlar Grid Straps are designed for stabilizing both poured concrete and block walls. Due to the extreme high strength to weight ratio, carbon fiber reinforcement is the repair material of choice for bowed basement walls, bridge columns, and concrete beams to restore and maintain structural integrity.

Carbon fiber is a proven alternative to steel for reinforcing structural substrates in residential and commercial applications. Carbon fiber is highly effective at adding tensile strength to concrete. It is superior to steel since it is stronger, lighter weight and non-corrosive. It also can be bonded to the surface of a concrete structure at any time to stop bowing and cracking. This allows limitless applications for new construction and repairs.
In addition to Carbon Fiber Straps, our Kevlar Neckties provide a secure anchorage system to further stabilize a foundation that has moved inwards as a result of top wall movement. Kevlar Neckties may be used in conjunction with Carbon Fiber Straps or Carbon Fiber Staples to further enhance the structural reinforcement of a foundation wall.

Epoxy & Polyurethane Foam

The repair of basement and crawl space foundation cracks with Emecole’s low-pressure injection system requires the use of either epoxy or polyurethane. Pending the applicator’s personal preference and/or type of crack, either injection material is suitable for most foundation cracks.


Non-Structural Wet & Leaking Cracks – Polyurethane

Typically resulting from concrete shrinkage, minor settlement that has since subsided…
For the typical wet and leaking foundation crack that poses no structural risk in the foundation, Emecole typically recommends the injection of polyurethane foam. Its flexibility allows for easier injection into foundation cracks. The real benefit is its expansion ability. As the two-part polyurethane reacts inside the crack (the addition of water inside the crack will also benefit the reaction of the polyurethane), it expands throughout the crack, literally moving throughout the crack, filling any void areas.


Multiple Cracks, Horizontal Cracks, Wide Cracks – Epoxy


Results from soil settlement/movement around the foundation, ground freezing/thawing…
When the foundation’s structural integrity is compromised by either a large/wide crack or the buildup of multiple cracks within the same area, the added strength of epoxy injection is necessary. With the injection of epoxy into a foundation crack, the result is a repaired crack with concrete that is bonded together, and now significantly stronger than the existing foundation wall.

Horizontal cracks in the foundation, or wall cracks wider than a quarter of an inch are general hints that the crack may be structural. Structural cracks typically form as a result of wall movement from thermal changes, uneven loading and settling of the footing, soil pressure and/or soil shrinkage.
If the area surrounding the foundation is still active (i.e. continued soil settlement, especially in colder climates where the soil experiences repeated freeze/thaw cycles), epoxy by itself may not be enough to prevent future cracks around the initially repaired area. Further reinforcement most likely will be necessary. The use of Carbon Fiber Countersunk Staples after the injection process can provide that reinforcement – in cases where the foundation’s structural strength is severely compromised, the use of Carbon Fiber Grid Straps and Neckties may be necessary.
Additional Note: For applicators who specifically prefer polyurethane as opposed to epoxy, Emecole 120 Structural Polyurethane is an Emecole manufactured specially formulated structural strength polyurethane which accommodates structural foundation crack repairs with the use of Carbon Fiber Staples.


Applicator Preference

The choice between epoxy and polyurethane foam for concrete crack injection often is made based on the applicator’s personal preference. Some contractors and companies may prefer to exclusively use one material for all repairs. Typically, polyurethane foam is more user-friendly as a result of it’s ability to expand – this generally makes it easier for applicator’s to properly ensure that the entire crack has indeed been properly filled.
While the injection of epoxy results in added bonding characteristics, the use of polyurethane typically is enough to properly repair most cracks that are simply wet and leaking and do not pose any structural risks. The added strength that comes with epoxy is necessary for the repair of foundation cracks where the structural integrity of the foundation wall may be compromised.

     img                                                      


Crawl Space  Foundation Sealant

The EmeSeal Crawl Space Sealing System is a necessary step in creating a healthy, energy efficient home. The EmeSeal System reduces energy costs – when installed with a one-inch or more air gap – and protects homes against dangerous moisture, toxic mold, soil gases (including radon), and harmful airborne allergens.

The EmeSeal System includes all the components needed for contractors to properly seal crawl spaces. A sealed and insulated crawl space provides immediate benefits by providing a dry, clean area.  Even more important are the long-term “Whole Home Health” benefits associated with eliminating harmful soil gases, radon gas and molds related to homes with unsealed crawl spaces.

crwn crwn

 


Sump Pumps and Basement Flood Protection

The number one cause of basement flooding is the failure of a sump pump system to effectively function. Unless properly designed, a typical home’s sump pump system failing is not a matter of if, but when.

EmeSump Systems and Accessories are custom built by the top manufactures in the industry to meet the high demands of our customers. The primary line of defense in waterproofing a basement or crawl space is the sump pump system, which is why we only use products that are designed with durability, reliability and efficiency as top priorities.

We carry a full line of contractor grade sump pumps and accessories. All are built with heavy duty materials and they can accomodate any size job. Choose from our Primary Sump Pumps, Battery Back Up Systems, Pump Pits and Accessories.

  • Full line of pumps available in 3/10hp, 1/2hp and 3/4hp.
  • AC and DC battery back-up systems.
  • Modular and round sump pits.
  • Check valves, AGM Maintenance Free Batteries and Dialer Alarms.
sump pumb
 
sump pumb